We are specialized in manufacturing all kinds of metal conduit,
Hangzhou Fanyumeier Trading Co., Ltd
Metal armored gas pipe
Metal armored gas pipe
The English name of the gas pipe is "Gas pipe", which is mainly a device for conveying gas connected by pipes, pipe joints and valves. Most of the pipelines used to transport gas are laid underground. The city's gas pipeline network is like the "blood" of the city, connecting various other safe operations and uses.
Product anatomy
The multi-layer structure composed of PVC outer layer, metal, rubber and other multi-layer materials ensures the quality inspection of layers and the explosion-proof safety of products.
Product parameters
Product name: Three-layer armored gas pipe
Working pressure: ≤0.6MPA
Nominal outer diameter: 18MM±0.5MM
Nominal diameter: 9.5MM±0.5MM
Applicable interface: 9-12MM pagoda socket
Service life: 6-8 years
Scope of application: Flexible connection between cylinders of liquefied gas, pipeline gas, natural gas, biogas, etc., and gas stoves and water heaters, to achieve the process of safe gas transportation.
Precautions:
1. The gas source valve must be closed after each use, and the gas source containing dimethyl ether must not be used.
2. It is strictly forbidden to use the connection between high voltage and commercial hot stoves such as restaurants.
Show details
1. Strong toughness
Bend at will, not easy to knot, suitable for installation in complex situations
2. Outer diameter of gas pipe
The outer diameter of the gas pipe is measured at about 18mm
3. Outer diameter of joint
The outer diameter of the pipe joint is about 22MM. If the hole needs to be perforated, the hole diameter must be larger than 23MM to pass through.
4. High-quality pipe clamps
The clamp can be detached, and the perforated installation is more convenient
5. thickened joints
Strong sealing, suitable for 9-12MM pagoda gas nozzle socket joint
6. independent packaging
Each tube is individually packaged, and 2 clamps are included
installation method
Insert the safety gas pipe connector into the cooker, water heater or valve connector you are using (as shown in the picture above), the insertion depth is 13-18MM, and then use a screwdriver to tighten the buckle of the connector to adjust the position of the bolt, so that the hose connector is connected to the gas nozzle connector. Clamp, and then use soap foam at both ends to check the tightness, if there is no leakage, it can be used normally.
Precautions
1) Be sure to close the air source valve before installation;
2) Inspect the product for damage in transit
3) Do not squeeze or impact with hard objects such as sharp metal
4) Before installation, hold the joint tightly by hand, do not pull it forcefully
5) The gas source valve must be closed after each use
6) Do not use the gas source of dimethyl ether
About us
The gas pipe factory is a specialized facility that manufactures metal armored gas pipes. The pipes are used to transport natural gas and other gases from one location to another. The factory uses state-of-the-art equipment and technology to produce high quality pipes that meet the strictest international standards.
No matter if there is nowhere to choose a practical partner in the decoration or someone in need of a large organization, we will be happy to help. Here is my contact information: michellezhu@finemaker.cn